Ultra-Hard Materials PCD Blank For Metal Cutting inserts
Quick Details:
1. High material removal rate
2. Lower cost per piece.
3. Especially for wood cutting.
4. High hardness, good cutting performance
5. High thermal conductivity, good thermal stability
Description:
PCD BLANKS is widely used for machining non-ferrous metals and alloys, such as aluminum, copper, aluminum/gray iron composites, as well nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber, ect., where high abrasion resistance and good surface finish are required.
PCD blank applies to various materials such as nonferrous metal, tungsten carbide, ceramic, nonmetal and composite material. PCD blank selected according to your requirements
| Specifications |
| Name | Polycrystalline Diamond |
| Brand | CT-S&T |
| Country | China |
| Usage | PCD inserts cutting tools |
| Application | Metal,Nonmetal,Wood |
| Thickness | 1.6/2.0/3.2 |
| Availability | In stock |
| Transportation | DHL, UPS, TNT, FEDEX |
| Grit | 3-28um |
M-Series
| Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
| ZT005 | 5 | 1.6/2.0/3.2 | 47.0/54.0 | Low | High | High |
| ZT10M | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
| ZT025M | 25 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
| ZT302M | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
W-series
| Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
| ZT10W | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
| ZT025W | 28 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
| ZT302W | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
Product Tags:
|
|
Polycrystalline Diamond 54mm Ultra Hard Diamond PCD For Metal Cutting Inserts Images
|
